Handy Do It Yourself Plumbing Tips For The Property Owner

Problems in plumbing can have bad effects on your house and belongings. Stop plumbing problems before they start by applying the following tips.



Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

Make sure you know where your home's water shutoff is located. browse this site know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong.

To avoid clogs, pay attention to what you flush. Sanitary napkins, thick toilet paper and baby wipes should never be flushed. These items can expand and cause a clog, or get caught on a pipe. Instead, dispose of them in a sanitary way that does not involve flushing them down the toilet.

Do not ignore a slow flushing toilet. This is usually a sign that something is wrong. It can also cause backups and overflows. The most common causes of a slow flushing toilet are sediment build up, tank malfunctions, or partial clogs. You should periodically check for these problems.

One of the things that you can do to maximize the security of your home is to seal all of the cracks in your outdoor faucets. Even a tiny crack can intensify as the season progresses and lead to serious problems down the road. Reduce drips and leaks for optimal protection.

If you've got a shower head to replace, get a good quality replacement. what is it worth think that one shower head is like any other, so decide on price alone. These types of fixtures are prone to breakage and are much less sturdy.

Clean the aerator to fix low pressure problems in case you have sediment buildups. Take the aerator apart and clean it with a brush and some vinegar. Then all you need to do is rinse and reassemble the aerator before putting it back on the faucet. By removing any grit, grime and debris from the aerator, the water pressure should significantly increase.

There are two ways to remove clean out plugs. You can use a hammer and a chisel to attempt to make the fitting looser. If that doesn't work, you'll need to break through the plug itself.

Orange or pink discoloration on your bathroom fixtures is a solid indication that your water contains too much iron. To get rid of this problem, you can either use a commercial product to soften the water, or have a contractor come to your home and do the work for you.

One of the things that you can do to safeguard your home from any serious plumbing issues is to install a flood alarm. This is a device that will sound when it comes in contact with water, alerting you if there are any issues in a particular area in the house.

One of the ways that you can improve the functionality of your shower head is to clean the mineral deposits from the surface. Unscrew your shower head and soak it in vinegar overnight. In the morning, brush off the deposits with a toothbrush to help the flow of water for your showers.

Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.

If the water is not going into your dishwasher, the first thing you should do is shit off the water under the sink. Chances are that you have some kind of blockage, and keeping the water turned on could actually create a bigger problem. To fix the blockage, you may need to call a plumber.

Use services like the Consumer Affairs Department to find a reputable contractor. You can make sure that their license is up to date and if there are any negative complaints against them. Plumbers that you contract to work on your house should both have a current license and a good standing with their previous clients.

Make sure that the temperature of your home's water heater is not above 120F. On older water heaters, be sure it is not above medium settings. When temperatures get higher than 120, scalding can occur. Also, having the settings above 120F, tends to use more energy than lower temperatures do.


Tank-less water heaters are a great space saving alternative to traditional tank units. They are available in many models, some for indoors and some models are capable for outdoor mounting. Tank-less water heaters are known as great money savers when it comes to your water bill.

When you want to unclog a drain, it's better not to use chemical drain openers. Even though they might be successful in unclogging the drain, the harmful chemicals in these products can be damaging to your skin. If you must use these harsh chemicals, always protect yourself with long-sleeved shirts and gloves.

As you can see from the above list of tips, maintaining and repairing your own plumbing can be very time and money-saving in the long run if you know what you are doing. After following these tips, you will no longer be new to plumbing, but you will become a plumbing expert.

Leave a Reply

Your email address will not be published. Required fields are marked *